List of products by manufacturer Atoo Electronics

per page
  • This splice tool is equipped with a stapler feeder to insert a frame of 20 clips in one time. Advantages : - No clip residue after splicing, - No problem inserting and holding the clip. The splicing works 100% when it is well done. This splice tool is equipped with a stapler feeder to insert a frame of 20...

  • Splice tape design consisting of a single Clip & Splice tape as an integrated part. This makes it easier to use clips and tape and splicing operation is easier.   The carrier is removed when the clip and tape are in place. The products are available in widths 8-24 mm and the colours yellow, blue, black, and green. Splice tape design consisting of a single Clip & Splice tape as an...

  • Clip dedicated for Atoo splice tool (ref: A01000002). Box of 500 units. Clip dedicated for Atoo splice tool (ref: A01000002). Box of 500 units.

  • The SMT cover tape extender minimizes electronic component waste by giving you 396 or 500 mm of non-adhesive film to start through the tape feeder when loading already used component reels. The cover tape extender 38µ is fixed to the strip end, before putting it on the feeder. It is an alternative to splicing, suitable solution for small and medium... The SMT cover tape extender minimizes electronic component waste by giving...

  • The SMT cover tape extender minimizes electronic component waste by giving you 396 or 500 mm of non-adhesive film to start through the tape feeder when loading already used component reels. The cover tape extender 50µ is fixed to the strip end, before putting it on the feeder. It is an alternative to splicing, suitable solution for small and medium... The SMT cover tape extender minimizes electronic component waste by giving...

  • Disposable heel pads are designed for visitors and other temporary workers entering controlled areas. Heels made from antistatic fabrics. Box of 100 units. Disposable heel pads are designed for visitors and other temporary workers...

  • Docking station for stapler splice tool (ref: CST-010). Trolley for splicing operations. Design optimized for these operations to store your necessary tools and consumables (scissors, cutters, splice tool, adhesives, etc.). Trolley height is adjustable depending on the operator and the machine used. Docking station for stapler splice tool (ref: CST-010). Trolley for splicing...

  • Silver color This consumable is used for manual splicing, the operator does not need a clip because it is the strong adhesive that replaces the clip. The consumable is made of two adhesive parts: a cellular part of the band and an upper part which is the transparent film. This product is detected by the machine and compatible with Fuji and Siemens machines. Silver color This consumable is used for manual splicing, the operator does...

  • Finger jig for splice tape manual. 4 locating pins to position the adhesive. The finger jig is a similar tool to the plate jig, but the finger jig has to be positioned in the palm of the hand and maintained with an elastic. Finger jig for adhesives of width 8, 12, 16, 24 and 32mm.  Finger jig for splice tape manual. 4 locating pins to position the adhesive....

  • Color: blue or red. This product is used for manual splicing with finger jig (ref: AFJS-200) or plate jig (ref: APJS-200) for attaching and holding reels. This product has a very strong stickiness. Color: blue or red. This product is used for manual splicing with finger jig...

  • Included: 1 stapler splice tool (CST-010) + 1 clip box (PSC-010). Stapler splice tool with semi automatic positioning. This stapler eliminates the handling of individual clip and can make the splice up to 10 times faster. Tape refill of 20 clips. Included: 1 stapler splice tool (CST-010) + 1 clip box (PSC-010). Stapler...

  • Included: 1 stapler splice tool (CST-010) + 5 clip boxes (PSC-010). Stapler splice tool with semi automatic positioning. This stapler eliminates the handling of individual clip and can make the splice up to 10 times faster. Tape refill of 20 clips. Included: 1 stapler splice tool (CST-010) + 5 clip boxes (PSC-010). Stapler...

  • Product that can be used with the Docking station that we propose (ref: STC-010). Product that can be used with the Docking station that we propose (ref:...

  • Splice cutter for 8-32mm and 2-4mm pitch. Equipped with locating pins to cut the component strips precisely. Splice cutter for 8-32mm and 2-4mm pitch. Equipped with locating pins to cut...

  • Plate jig for splice tape manual. 4 locating pins to position the adhesive. Plate jig for adhesives of width 12, 16 and 24 mm (embossed paper) Plate jig for splice tape manual. 4 locating pins to position the adhesive....

  • All splices can be used on all the machines then according to your needs, they come in different categories: Bu : No ESD - All types of machines - ø traceabilityBu : No ESD - All machine types + reinforced adhesion - ø traceability Bu : ESD - All types of machines - ø traceabilityBu : ESD - Panasonic machines requiring traceability 8-12-16-24-32-44-56mm All splices can be used on all the machines then according to your needs,...

Showing 1 - 16 of 27 items