-
Stapler Splice CLIP for CST-010 Stapler Splice CLIP for CST-010
Splice clip for semi-automatic stapler tool (ref: CST 010). The stapler must be loaded with 20 clips. Each carton contains 8 plastic cartridges with 25 frames, each frame has 20 clips, totally 4000 clips/carton. The plastic cartridge fit the splice pocket UPT010 for convenient handling. Splice clip for semi-automatic stapler tool (ref: CST 010). The stapler must...
-
Kapton polyimide standard Kapton polyimide standard
Masking of the cards before wave soldering, maintenance of thermocouples during the production of thermal profiles, electrical insulation for the transformer, motor, coil, capacitor etc. Temperature: -60 ° to 280 ° C Length: 33MWidth: 3 to 50mm as standard (other dimensions or formats available on request)ESD: NOColor: amber Masking of the cards before wave soldering, maintenance of thermocouples...
-
Carbon ESD palm coated gloves Carbon ESD palm coated gloves
Carbon ESD coated on the palm and fingertips gloves. The coating is done on the entire palm and on the fingertips. Do not leave any scratches or dust on the finished products. Dissipation of static electricity with carbon wire. Packaging: pack of 10 pairs. Size: S to XL Carbon ESD coated on the palm and fingertips gloves. The coating is done on...
-
Stencil clean roll DEK Stencil clean roll DEK
DEK Hyperclean Roll - Ø20mm New stencil cleaning non-woven paper made of polypropylene with longer fibers, manufactured by heat-sealing without chemical ingredients and with excellent features. Box x40 DEK Hyperclean Roll - Ø20mm New stencil cleaning non-woven paper made of...
-
ESD Portable Magnifier ESD Portable Magnifier
ESD portable magnifier with a 60mm diameter lens. Use for the inspection of printed boards. Simple handling with practical size: 19cm long. Black magnifying lamp. ESD portable magnifier with a 60mm diameter lens. Use for the inspection of...
-
Strip Feeder Tray Strip Feeder Tray
Strip feeder tray base plate for max.11 x 8mm tape strips. ESD safe. Fits all machines. Enables the use of small quantities of components on a Pick&Place machine. Same size as JEDEC tray holds strips of 300mm. Add supports (ref. A05000002): available in 8, 13 and 19mm. Strip feeder tray base plate for max.11 x 8mm tape strips. ESD safe. Fits all...
-
Kapton polyimide low ESD Kapton polyimide low ESD
Masking of the cards before wave soldering, maintenance of thermocouples during the production of thermal profiles, electrical insulation for the transformer, motor, coil, capacitor etc. Temperature: 290 ° C Max Adhesion (N / 25mm): 5 to 6Surface resistance: 106 -109 OhmsLength: 33m Masking of the cards before wave soldering, maintenance of thermocouples...
-
Kapton polyimide Super low ESD Kapton polyimide Super low ESD
Masking of the cards before wave soldering, maintenance of thermocouples during the production of thermal profiles, electrical insulation for the transformer, motor, coil, capacitor etc. Temperature: 290 ° C Max Lenght: 33MWidth: 3 to 40mm as standard (other dimensions / formats available on request)ESD: YESAdhesion (N / 25mm): 4 to 6Surface resistance:... Masking of the cards before wave soldering, maintenance of thermocouples...
-
Cover Tapes Extenders 38µ Cover Tapes Extenders 38µ
The SMT cover tape extender minimizes electronic component waste by giving you 396 or 500 mm of non-adhesive film to start through the tape feeder when loading already used component reels. The cover tape extender 38µ is fixed to the strip end, before putting it on the feeder. It is an alternative to splicing, suitable solution for small and medium... The SMT cover tape extender minimizes electronic component waste by giving...