• Products
per page

  • Finger jig for splice tape manual. 4 locating pins to position the adhesive. The finger jig is a similar tool to the plate jig, but the finger jig has to be positioned in the palm of the hand and maintained with an elastic. Finger jig for adhesives of width 8, 12, 16, 24 and 32mm.  Finger jig for splice tape manual. 4 locating pins to position the adhesive....

  • Color: blue or red. This product is used for manual splicing with finger jig (ref: AFJS-200) or plate jig (ref: APJS-200) for attaching and holding reels. This product has a very strong stickiness. Color: blue or red. This product is used for manual splicing with finger jig...

  • Plate jig for splice tape manual. 4 locating pins to position the adhesive. Plate jig for adhesives of width 12, 16 and 24 mm (embossed paper) Plate jig for splice tape manual. 4 locating pins to position the adhesive....

  • Masking of the cards before wave soldering, maintenance of thermocouples during the production of thermal profiles, electrical insulation for the transformer, motor, coil, capacitor etc. Temperature: -60 ° C to 280 ° C From 3 to 30mm diameter: 2.000pcs/roll. Other dimensions / formats available on request ESD: NO Color: amber Masking of the cards before wave soldering, maintenance of thermocouples...

  • Temperature: 280°C max Diameter from 03 to 10: 10,000 dots per roll Diameter from 11 to 15: 5,000 dots per roll Diameter from 16 to 22: 2,000 dots per roll (Other dimensions / formats available on request ) ESD: YES Surface resistance: 106 -109Ohms Color : amber Temperature: 280°C max Diameter from 03 to 10: 10,000 dots per roll Diameter...

  • Temperature : 290°C max Diameter from 3 to 10mm: 10,000 dots per roll Diameter from 10: 5,000 dots per roll (other dimensions or formats available on request) Adhesion (N / 25mm): 5 to 6 Surface resistance: 106 -109 Ohms  ESD : YES Color : amber Temperature : 290°C max Diameter from 3 to 10mm: 10,000 dots per roll...

  • Silver color This consumable is used for manual splicing, the operator does not need a clip because it is the strong adhesive that replaces the clip. The consumable is made of two adhesive parts: a cellular part of the band and an upper part which is the transparent film. This product is detected by the machine and compatible with Fuji and Siemens machines. Silver color This consumable is used for manual splicing, the operator does...

  • Box consisting of adhesives that can be positioned on the wrist. Adhesives can be used for peeling off cover tape (no splicing error) and sealer for reel end. Detachable upper band Dedicated to 8mm x 23mm adhesives Box 120 Box consisting of adhesives that can be positioned on the wrist. Adhesives...

  • Tape remover superior peel off We also propose the tape remover with wrist (ref: ASPOT - 120). Dedicated to 8mm x 23mm adhesives Red color Box of 120 units Tape remover superior peel off We also propose the tape remover with wrist...

  • Splice tool for splice clip with unit supply (splice clip brass ref : SMS 0600C, splice clip steel ref: SMS 0601C). Splice tool for splice clip with unit supply (splice clip brass ref : SMS...

  • Splice scissor use for 8mm size carrier tape with positioning function. These splicing scissors are equipped with 2 locating pins to ensure a precise cut.  Pitch 2mm and +. Splice scissor use for 8mm size carrier tape with positioning function. These...

  • Large splice cutter for 12mm or above size carrier tape and 4 mm pitch. Large splice cutter for 12mm or above size carrier tape and 4 mm pitch.

  • Tip TMT Cartridge K Series Chisel 30° 1.50mm (0.06"") Chisel 30° 1.50mm (0.06")Datashhet Tip TMT Cartridge K Series Chisel 30° 1.50mm (0.06"") Chisel 30° 1.50mm...

  • Tip TMT Cartridge K Series Chisel 30° 2.5mm (0.10"") Chisel 30° 2.5mm (0.10")DATASHEET Tip TMT Cartridge K Series Chisel 30° 2.5mm (0.10"") Chisel 30° 2.5mm...

  • Tips M Series Bent sharp 30° 0.4mm (0.016"") Bent sharp 30° 0.4mm (0.016"")DATASHEET Tips M Series Bent sharp 30° 0.4mm (0.016"") Bent sharp 30° 0.4mm...

Showing 65 - 80 of 137 items