- Splicing

Active filters

  • Plate Jig

    Plate jig for splice tape manual.

    4 locating pins to position the adhesive.

    Plate jig for adhesives of width 12, 16 and 24 mm (embossed paper).

  • Splice tool SMSTL-10

    Splicing pliers for clips with unit supply.

    Splice tool for splice clip with unit supply (splice clip brass ref : SMS0600C, splice clip steel ref: SMS0601C).

    Splice clip brass SMS0600C are available here

  • Cover tape extender 50µ

    The SMT cover tape extender minimizes electronic component waste by giving you 396 or 500 mm of non-adhesive film to start through the tape feeder when loading already used component reels.

    The cover tape extender 50µ is fixed to the strip end, before putting it on the feeder.

    It is an alternative to splicing, suitable solution for small and medium production.

  • Stapler clip for CST-010

    Splice clip for semi-automatic stapler tool (ref: CST 010) available here.

    The stapler must be loaded with 20 clips.

    Each carton contains 8 plastic cartridges with 25 frames, each frame has 20 clips, totally 4000 clips/carton. The plastic cartridge fit the splice pocket UPT010 for convenient handling.

    Box 4000 pcs

  • Finger Jig

    Finger jig for splice tape manual.

    4 locating pins to position the adhesive.

    The finger jig is a similar tool to the plate jig, but the finger jig has to be positioned in the palm of the hand and maintained with an elastic.

    Finger jig for adhesives of width 8, 12, 16, 24 and 32mm.

  • Tape extender 38µ

    The SMT cover tape extender minimizes electronic component waste by giving you 396 or 500 mm of non-adhesive film to start through the tape feeder when loading already used component reels.

    The cover tape extender 38µ is fixed to the strip end, before putting it on the feeder.

    It is an alternative to splicing, suitable solution for small and medium production.

  • Atoo splice tool

    This splice tool is equipped with a stapler feeder to insert a frame of 20 clips in one time.

    Advantages :

    - No clip residue after splicing,

    - No problem inserting and holding the clip.

    The splicing works 100% when it is well done.

    Atoo splice tool no requires adjustment and fits with all widths.

    Clips A01000003 are dedicated to this splice tool and they are available here.

  • Fix tape for Jig

    Color: blue or red.

    This product is used for manual splicing with finger jig (ref: AFJS-200) or plate jig (ref: APJS-200) for attaching and holding reels.

    This product has a very strong stickiness.

    Box 40 pcs

  • Splice tape for trolley

    Product that can be used with the Docking station that we propose (ref: STC-010).

    Several sizes available.

    Box of 800 pieces.

  • Splice cutter 8-56mm

    Splice scissor use for 8-56mm size carrier tape and 4mm pitch.

    These splicing scissors are equipped with locating pins to cut the component strips very precisely.

  • SMT splice brass clip

    SMT splice clip

    Brass clip

    Box 4000

    To use with splice tool with unit supply (ref. SMSTL-10) : splice tool available here.

  • Clip for Atoo splice tool

    Clip dedicated for Atoo splice tool (ref: A01000002) available here.

    Box of 500 units.