Produits

French-made flagship Marten Kolinsky

Yellow point, light belly, seamless silver ferrule, short black varnished handle, yellow at the end. Incomparable elasticity, ideal for details.

Purchase not possible online, please contact us by email: info@atoo-electronics.com to define the needed characteristics and dimensions.

Strip feeder tray base plate for max.11 x 8mm tape strips.

ESD safe.

Fits all machines.

Enables the use of small quantities of components on a Pick&Place machine.

Same size as JEDEC tray holds strips of 300mm.

Add supports (ref. A05000002): available in 8, 13 and 19mm.

Plate jig for splice tape manual.

4 locating pins to position the adhesive.

Plate jig for adhesives of width 12, 16 and 24 mm (embossed paper).

Finger jig for splice tape manual.

4 locating pins to position the adhesive.

The finger jig is a similar tool to the plate jig, but the finger jig has to be positioned in the palm of the hand and maintained with an elastic.

Finger jig for adhesives of width 8, 12, 16, 24 and 32mm.

Brass Curl for soldering and desoldering station 

Pack x10

To clean the tip of the soldering iron without water

Keeps the temperature of the tip

For dry soldering irons

Splice clip for semi-automatic stapler tool (ref: CST 010) available here.

The stapler must be loaded with 20 clips.

Each carton contains 8 plastic cartridges with 25 frames, each frame has 20 clips, totally 4000 clips/carton. The plastic cartridge fit the splice pocket UPT010 for convenient handling.

Box 4000 pcs

Digital temperature calibration, temperature locked by password.

Parameters of three channels pre-set memory.

Temperature alarm function.

Sensor close to the tip, detect real-time temperature of tip, ensure rapid thermal recovery.

Plug-in design of heating element and soldering tip for easy replacement.

SEA BRAID desoldering braid.

Ready to use with the flux of your choice.

RoHS Compliant.

Oxide-free clean copper.

More strands of copper (more surface area) per square inch.

Can be used in conjunction with any flux to fit your process.

Coated to prevent oxidation.

Manual dispensing  gun for syringes of 10/12cc or 30/35/55cc, depending on your need please choose your option below.

Discharge time: for 1000V to 100V <2sec

Effect Shielding: E <10nJ

Conforms to standards: PN–EN (IEC) 61340-5-1, PN–EN (IEC) 61340-5-3; PN–EN (IEC) 61340-4-8

Resistance surface: RS= 10^8-10^10

Thickness: 76μ

Transparency: 40%

Purchase not possible online, please contact us by email: info@atoo-electronics.com to define the needed characteristics and dimensions.

Tips M Series Conical 0.4mm (0.016"") Power Plus

Conical 0.4mm (0.016"") Power Plus

DATASHEET

80°C

Plastic

For orders below 40 racks, please contact us.