Offer Banner
Produits
-
Stapler clip for CST-010
Splice clip for semi-automatic stapler tool (ref: CST 010) available here.
The stapler must be loaded with 20 clips.
Each carton contains 8 plastic cartridges with 25 frames, each frame has 20 clips, totally 4000 clips/carton. The plastic cartridge fit the splice pocket UPT010 for convenient handling.
Box 4000 pcs
Thermaltronics : Lead-free...
Digital temperature calibration, temperature locked by password.
Parameters of three channels pre-set memory.
Temperature alarm function.
Sensor close to the tip, detect real-time temperature of tip, ensure rapid thermal recovery.
Plug-in design of heating element and soldering tip for easy replacement.
Desoldering braid SEA BRAID
SEA BRAID desoldering braid.
Ready to use with the flux of your choice.
RoHS Compliant.
Oxide-free clean copper.
More strands of copper (more surface area) per square inch.
Can be used in conjunction with any flux to fit your process.
Coated to prevent oxidation.
Atoo splice tool
This splice tool is equipped with a stapler feeder to insert a frame of 20 clips in one time.
Advantages :
- No clip residue after splicing,
- No problem inserting and holding the clip.
The splicing works 100% when it is well done.
Atoo splice tool no requires adjustment and fits with all widths.
Clips A01000003 are dedicated to this splice tool and they are available here.
Tip tinner
Tip Tinner 20g
Removes tip oxidation
No-Clean compatible formulation
Minimal residues
Rapidly re-tins badly oxidised soldering iron tips
Desoldering braid NO CLEAN
ESD desoldering braid Format:
1 bobbin (in rolls of 25) except for length greater than 30 meters in this case 1 spool.
Contact us if you are interested in other dimensions than those offered.
Disposable heels
Disposable heel pads are designed for visitors and other temporary workers entering controlled areas.
Heels made from antistatic fabrics.
Box of 100 units.
Static Shielding Adhesive...
Discharge time: for 1000V to 100V <2sec
Effect Shielding: E <10nJ
Conforms to standards : PN–EN (IEC) 61340-5-1, PN–EN (IEC) 61340-5-3; PN–EN (IEC) 61340-4-8
Resistance surface: RS= 10^8-10^10
Thickness: 76μ
Transparency: 40%
Purchase not possible online, please contact us by email: info@atoo-electronics.com to define the needed characteristics and dimensions.
Dispensing needles sample case
Convenient assortment-box with 144 pieces assorted.
Assortment of most commonly used dispensing needles: plastic, metal, bent and en Teflon needles, etc.
Tips M Series Bevel 60°...
Tips M Series Bevel 60° 1.68mm (0.07"")
Bevel 60° 1.68mm (0.07"")
DATASHEETSplice tape for trolley
Product that can be used with the Docking station that we propose (ref: STC-010).
Several sizes available.
Box of 800 pieces.