Best sellers

Active filters

  • Kapton polyimide standard

    Masking of the cards before wave soldering, maintenance of thermocouples during the production of thermal profiles, electrical insulation for the transformer, motor, coil, capacitor etc.

    Temperature: -60 ° to 280 ° C Length: 33M

    Width: 3 to 50mm as standard (other dimensions or formats available on request)

    ESD: NO

    Color: amber

  • Kapton polyimide low ESD

    Masking of the cards before wave soldering, maintenance of thermocouples during the production of thermal profiles, electrical insulation for the transformer, motor, coil, capacitor etc.

    Temperature: 290 ° C Max

    Adhesion (N / 25mm): 5 to 6

    Surface resistance: 10^6 -10^9 Ohms

    Length: 33m

  • Dots Kapton ESD

    Masking of the cards before wave soldering, maintenance of thermocouples during the production of thermal profiles, electrical insulation for the transformer, motor, coil, capacitor etc.

    Temperature : 290°C max

    Diameter from 3 to 10mm: 10,000 dots per roll

    Diameter from 10: 5,000 dots per roll (other dimensions or formats available on request)

    Adhesion (N / 25mm): 5 to 6

    Surface resistance: 106 -109 Ohms

    ESD : YES

    Color : amber

  • Dots Kapton standard

    Masking of the cards before wave soldering, maintenance of thermocouples during the production of thermal profiles, electrical insulation for the transformer, motor, coil, capacitor etc.

    Temperature : -60°C to 280°C

    From 3 to 30mm diameter: 2.000pcs/roll.

    Other dimensions / formats available on request

    ESD: NO

    Color: amber

  • Plate Jig

    Plate jig for splice tape manual.

    4 locating pins to position the adhesive.

    Plate jig for adhesives of width 12, 16 and 24 mm (embossed paper).

  • Splice tool SMSTL-10

    Splicing pliers for clips with unit supply.

    Splice tool for splice clip with unit supply (splice clip brass ref : SMS0600C, splice clip steel ref: SMS0601C).

    Splice clip brass SMS0600C are available here

  • SMT splice brass clip

    SMT splice clip

    Brass clip

    Box 4000

    To use with splice tool with unit supply (ref. SMSTL-10) : splice tool available here.

  • Stapler clip for CST-010

    Splice clip for semi-automatic stapler tool (ref: CST 010) available here.

    The stapler must be loaded with 20 clips.

    Each carton contains 8 plastic cartridges with 25 frames, each frame has 20 clips, totally 4000 clips/carton. The plastic cartridge fit the splice pocket UPT010 for convenient handling.

    Box 4000 pcs

  • Atoo splice tool

    This splice tool is equipped with a stapler feeder to insert a frame of 20 clips in one time.

    Advantages :

    - No clip residue after splicing,

    - No problem inserting and holding the clip.

    The splicing works 100% when it is well done.

    Atoo splice tool no requires adjustment and fits with all widths.

    Clips A01000003 are dedicated to this splice tool and they are available here.

  • Clip for Atoo splice tool

    Clip dedicated for Atoo splice tool (ref: A01000002) available here.

    Box of 500 units.

  • Stapler splice tool semi auto

    Stapler splice tool with semi automatic positioning.

    This stapler eliminates the handling of individual clip and can make the splice up to 10 times faster.

    Tape refill of 20 clips (product reference: PSC-010) available here.

    The splicing works 100% when it is well done.

  • Splice cutter 8-56mm

    Splice scissor use for 8-56mm size carrier tape and 4mm pitch.

    These splicing scissors are equipped with locating pins to cut the component strips very precisely.